For 24v garden lighting systems, Lumena supply 24v Constant Voltage LED Drivers in 2 different wattages, 15w, and 30w.
Lumena 24v Constant Voltage LED Drivers have 1.5m of fixed weatherproof mains (240v) input cable with a 3 pin plug. There is 25cm of fixed, weatherproof, 24v 2 core output cable. This has D shape plug & play male 2 pin adaptor for easy installation of the DConnect Range – particularly the Litecast and Lediflex.
Alternatively, the plug and play connector simply cuts off if 2 core open-end is required. Install the driver above ground on a suitable post or wall. Easy to use surface mount clips are located at each end of the transformer.
IMPORTANT: To ensure that the correct size driver is used, the total wattage of the 24v light fittings needs to be calculated. This can be done easily by multiplying the lamp wattages for each fitting type. Add these totals together to determine which size constant voltage LED driver you need. It is important not to overload the 24v DC transformer. It is recommended that some spare wattage capacity is left, in case additional lights are required. In addition, it is equally important not to use too few lights or have too low wattages on a 24v lighting system as this may cause ‘overvoltage’.