1.5mm 2 Core Rubber Cable Reels (12V)
From: £46.00
Applies to UK Mainland on items in stock and ready for dispatch.
This 1.5mm 2 core cable will connect a number of Lumena 12V garden lights together via junction boxes, or direct to transformers, to create a complete 12v system. It is ideal for outdoor applications due to it being both water resistant and oil resistant. Available in 25m, 50m and 100m cable lengths.
We recommend that all 2 core cable is protected in conduit. This not only protects the cable from accidental damage, but also from rodents, acidic soil, weed killer and other chemicals, and also the sun
1.5mm 12v 2 Core Rubber Cable
This 1.5mm 2 core cable will connect a number of Lumena 12V garden lights together via junction boxes, or direct to transformers, to create a complete 12v system. It is ideal for outdoor applications due to it being both water resistant and oil resistant. To prevent voltage drop, keep cable runs to a minimum (up to approx. 35-40m if possible). For longer cable runs, use thicker cable (see below). Available in 25m, 50m and 100m cable lengths. Please note this rubber cable is not armoured so position with care.
This H07RN-F rubber cable is extra flexible even when installed in temperatures less than zero degrees. The copper stranded conductor cables are insulated individually internally. In addition, a tough yet flexible neoprene rubber sheath surrounds both cables , protecting from damage.
We recommend that all 2 core cable is protected in conduit. This not only protects the cable from accidental damage, but also from rodents, acidic soil, weed killer and other chemicals, and also the sun.
Alternative cable sizes available:
2.5mm 2 core cable is a thicker cable recommended for particularly long 12v cable runs up to approx. 50m with 12 fittings evenly spaced (varies based on total wattage)
0.75mm 2 core cable is a standard spec 12v cable, suitable for basic 12v garden lighting systems up to approx 25m. with 12v fittings evenly spaced (varies based on total wattage)
To prevent voltage drop, keep cable run lengths to a minimum and evenly space fittings.
| Cable Length | 25m, 50m, 100m |
|---|---|
| Core Cable | 2x 1.5mm² (12v) – Rubber |
| Conductor | Copper |
| Overall Dimater of Cable | 9mm |
| Sheath | Neoprene (Rubber) |
| Sheath Thickness | 0.6 – 1mm |
| Operating Temperature Range | -30°C to +60°C |
| Voltage | 750V Max. (Suitable for use with 12v Lighting Systems) |
| Additional Information | VDE Approved, RoHS Compliant |
| Type | H07RN-F |
What is voltage drop?
The term ‘Voltage Drop’ relates to the amount of voltage loss that occurs through all or part of a circuit. This is a result of increased resistance which is a measure of the opposition to current flow in a circuit, measured in ohms (Ω). Electrical cables of any size and length carrying current always present resistance. Although it can affect the entire circuit, it is first apparent at the end of a cable run. A simple comparison would be a garden hose, where the pressure of water running through it reduces the further away it is from its source.
What causes voltage drop?
The 4 main factors which contribute to voltage drop are cable length, wire temperature, wire material and the cross sectional area. Generally, 12V lighting systems can withstand a maximum voltage drop of up to 8% (1V) with no noticeable effects, on the basis that the correct cable / power source is used and it is within range of the LED lamp voltage. If significant voltage drop does occur, it can cause dim lighting, strobing or no power at all.
How to reduce voltage drop
To reduce the risk of voltage drop, consider the following:
- Reduce cable runs – keep length to a minimum with no more than 12 fittings per circuit
- Highly conductive wire, e.g. copper. A tinned end can improve performance and longevity
- Use high quality, heat resistant rubber cable. Minimum H05RN-F
- Use thicker cable where possible (1.5mm² / 2.5mm²) with a secure, watertight connection
For a larger garden where this is not possible, consider laying a mains power feed to various points / areas where additional 12V transformers can be installed to create separate, smaller circuits. 240V fittings can also be connected to the mains feed if required.
Voltage drop cable run guides
Suggested maximum cable run includes cable supplied with each fitting, adaptors and connector cables. Where longer cable runs are required, use thicker cable such as 1.5mm² / 2.5mm² which have a lower resistance and reduce voltage drop. Cable runs can be increased by up to 50% (approx.) when thicker cable is used.
For longer cable runs, thicker cable is recommended. The below table is for 1.5mm and 2.5mm 2 core cable.
The above tables are a guide only. We strongly recommend that the voltage is checked with a volt meter at each fitting prior to final placement. Some external factors can affect performance, such as placement of cable etc.