Free Delivery on orders over £100

We love the trade! Sign up today!

Need advice? call 01327 871161

Rated Excellent on Reviews.co.uk





SMD2835 7W = 40 pcs (main light) / 10 pcs (wall wash)

Colour Temperature (kelvins)

Daylight White – 6000K, Warm White – 3000K

Lumen Output

7W = 700lm

Beam Angle

100 Degrees

LED Expected Life

Up to 35,000 hours

IP Rating



Photocell (Dusk to Dawn), PIR (Motion Sensor)

PIR Sensor Detection Range

approx. 2m
120 degree

Lighting Modes

1) Constant Light PIR Mode – 50% constant light from dusk for 5 hours / 30% battery, then switches to standard PIR mode
2) Wall Wash PIR Mode – Wall wash from dusk, main light illuminates at full brightness when PIR is triggered for approx. 20 seconds
3) Standard PIR Mode – Light remains off until PIR is triggered by movement, then full brightness of Main Light for approx. 20 seconds
4) ON / OFF (previous memory)

Battery Type

7W = Lithium Ion (18650/3.7V/5400mAh) REPLACEABLE

Solar Panel (adjustable)

7W = 3.7Wp Poly-crystalline Solar Panel

Remote Control

Infrared (range up to 7m)

Wood Type

Radiata Pine – Pressure Treated with Tanalith E Preservative

Install Height

800mm above ground / 400mm below ground (1200mm overall)

Plank Dimensions

1200 x 220 x 44mm


3 Years

Waste Disposal / Recycling

Batteries: BPRN0843, Electrical: WEE/KC3440XY

Triple Function 800mm Solar Path Light with PIR & Remote Control


  • Adjustable Poly-crystalline Solar Panel (70 degrees)
  • Replaceable Lithium Ion Battery
  • Triple Function PIR Motion Sensor
  • Remote Control for quick and easy mode setting, including previous memory
  • Security Light – Wall Wash and Flood Light Functions
  • 1200mm Radiata Pine Mounting Plank (800mm above ground)


The Securbol 800mm solar path light with PIR is a versatile security light for illuminating pathways and driveways. The PIR motion sensor has a substantial detection range with 120 degree beam angle.  The main flood light section of the light has high output daylight white LEDs which project a spread of light downwards and forwards. Additionally, a subtle warm white wash / down light creates a low level security light which will last for hours. The mode is switched to Wall Wash PIR Mode via the remote control. The remote will also control all fittings in range (infra-red).

The Secursol, super bright solar light is mounted on top quality, radiata pine, which is fully sanded to give a smooth, quality finish. It is also pressure treated with Tanalith E preservative in accordance with BS8417 to meet Use Class 4. This 1200mm plank can be mounted 400mm into soft ground / concrete with no restrictions on positioning. This makes it perfect for long drives and paths where mains power is not feasible. Alternatively, the plank can be screwed to the surface of a low level wall for additional 400mm height. Adjust the angle of the poly-crystalline solar panel by up to 70º to catch a better angle of UV rays without altering the direction in which the solar path light shines.

Decent charge levels will be retained due to the quality lithium ion battery, alongside the integrated, adjustable solar panel which is extremely effective. Additionally, the battery is replaceable, which is another great benefit, increasing the life of the fitting even further. With sufficient charge, the long life LEDs will continue to illuminate throughout the night, every day, which is further prolongued using different modes. Even in the dullest of weather, our solar lights will still illuminate, although they may not last the entire night cycle, which in many cases is not a necessity.



There are 3 different lighting modes to choose from. Switch between modes by selecting on the fitting control panel, hidden by the solar panel or via the long range remote control (up to 10m). The remote makes controlling the unit even easier, especially when mounted in hard to reach areas. The light will flash once to confirm when an alternative function is selected.

Power Button - Secursol Remote Control Solar Light      ON / OFF (previous memory)

Secursol Long Range Controller - Constant Lighting + PIR Sensor Mode      Constant Light PIR Mode – 50% constant light from dusk for 5 hours / 30% battery, then switches to standard PIR mode

PIR Sensor + Dim Mode - Secursol Controller Button      Wall wash PIR Mode – Wall wash from dusk, main light illuminates at full brightness when PIR is triggered for approx. 20 seconds

Secursol Button - PIR Sensor + Off Mode      Standard PIR Mode – Light remains off until PIR is triggered by movement, then full brightness of Main Light for approx. 20 seconds

Secursol Remote Control Solar Light - Button not in use      Not In Use


The reliable, modern technology of Lumena’s solar path lights are superior to many cheaper alternatives on the market. Installation costs are minimal with no wiring, and in turn, no need to dig large trenches which can be costly. Furthermore, basic installation is the ideal solution for areas where mains power is not possible, or very difficult. The Securbol Adjustable Solar Path Light with PIR motion sensor is almost maintenance free with no running cost. It is also environmentally friendly, gaining it’s charge from the most powerful, natural energy source – the sun.

As with most purchases, it is important that items are maintained correctly after installation. This is especially important for outdoor lighting which can be affected by the outdoor environment, especially in harsher areas such as coastal areas. By not following the aftercare instructions, which are always included with the relevant product, this may void any guarantees or warranties.


Lumena offer a number of Teak bollards and post lights in a range of sizes. Teak wood is a part of the ‘Tectona Grandis’ hardwood species and is highly durable, producing a natural oil which helps protect from outdoor conditions. As Teak is subject to outdoor weather conditions, it starts to age and develop a duller, soft, grey appearance. This elegant, lightweight wood is ideal for both domestic and commercial use and is very easy to maintain.

To add a further protective coating from weather conditions, teak sealer is highly recommended. Lumena always apply at least one coat of Teak sealer prior to dispatch but this should also be applied periodically to help protect and freshen up the path lights.



Contrary to popular belief, Stainless steel needs looking after; especially in exposed and coastal areas. If not cleaning on a regular basis, the acid that is ever present in the air ( and salt in coastal areas) will affect the surface causing pitting and even rust like staining (known as ‘Tea staining’ ) to appear.

To keep your lights looking good, simply wipe clean the outside with a damp cloth and then dry once a month, (more frequently in coastal areas). Specialist stainless steel cleaning products can be used (We recommend and stock ‘Kilrock stainless steel cleaner’) but never use an ABRASIVE cleaner. In extreme conditions we recommend applying 2 coats of Clear lacquer to protect the steel surface. (We recommend and stock ‘Simoniz’ clear lacquer).



Both brass and copper are extremely durable materials, with brass being a combination of copper and zinc, meaning neither can rust or corrode. Over time brass will subtly weather and naturally change to a darker colour which will blend in with the garden surroundings. Copper also naturally changes colour quite dramatically, often resulting in a brown or ‘verdigris’ effect, again to blend in with the outdoor surroundings. This is because copper reacts with atmospheric oxygen. Although some people may prefer a pristine, shiny copper finish, the oxide layer in fact prevents corrosion and simply adds to the character of natural copper creating a traditional, ‘olde worlde’ appearance. If a new copper finish is preferred, a layer of lacquer can prevent / slow down the weathering process.



240v fittings can be affected by damp conditions, typically when located outdoors. When a fitting is located outside in the cold air combined with the heat produced by the lamp inside, it is inevitible that condensation will occur, just as it does on bedroom windows in the home. If too much condensation is produced, this could result in the fitting tripping, especially in these types of fittings where a drainage hole is not possible. To combat this, Lumena include silica gel with all 240v in-ground lights and spike light to soak up any excess moisture – these should not be removed but replaced periodically and fittings checked. If any water is sitting in the fitting, this should be tipped out and the fitting safely dried out. Condensation can be more prominent when the fitting has been opened on a damp day, as the damp air will then be trapped inside when re-sealed. Therefore it is recommended that any maintenance, including changing bulbs, is performed on a dry day. An additional practice put in place by Lumena is to apply Lithium Grease to the bulb holder / bulb which acts as an additional seal to prevent tripping. Although this prevents tripping, the fittings will still need to be checked and dried out should water sit inside the fitting. For extra protection, fitting can also be filled with Wiska Gel (electrical insulation).

It is important that anybody installing or carrying out maintenance on Lumena Products refer to the instruction manual prior to commencing work. Lumena Lights ensure instructions available online are completely up to date and accurate.